You are Buying 25ml of ONCE SO REAL AIR DRY PAINT in the SQUARE BOTTLE, the small Pot is to show the colour of the paint better
This colour allows you to colour realistic reborn babies in the So Real! © Skin-art, to achieve a strikingly realistic three-dimensional colour skin with pores, veins and capillaries.
As an independent supplier with many years experience in the area, we offer these paints after extensive sampling of various colour schemes and a long test period on various vinyl qualities especially developed for flexible PVC industry colour.
This colour corresponds to the state of the art for water-based inks for plastics. Compared to other water-based inks, this product has by far the best adhesion and resistance to flexible PVC. Normally, only such properties of paints based on solvents can be achieved.
From the first application of paint the So Real © PVC Colours give an excellent effect on soft vinyl: The paint can be applied very well, and forms a semi-gloss, uniformly thin ink film which adheres to the soft vinyl perfectly.
The processing time and the smooth surface after drying which are specifically tailored to the requirements of the multilayer So Real! © Skin-art. and enable compelling Reborn results. With a heat gun, drying can be accelerated if necessary.
The colour dispersion containing a plasticizer barrier for all common plasticizer. The pigments in accordance with the requirements of EN 71/Teil 3 (Toy Standard), and have a very high light and UV resistance.
The So Real! © PVC Colours are especially formulated to be mixed with water as they are highly pigmented, so that they can be applied in a very thin concentration on the vinyl. If you need a colour correction you can use our So Real! © vinyl cleaner at any time!
One colour - many uses! ! The So Real © PVC Colours are a convincing all-round product that you can apply multiple layers for different dyeing work on your baby:
* Primer *
* Viening and interior shading *
* External Blushing
* Colour of the lips *
* Design of the Nails *
* Use for eyebrows and freckles, and special effects *
Our colour diversity is unparalleled and offers each Reborn Artist the optimum condition for a life-like colours. The Artist also has the possibility of mixing their own blends of colours at any time to create your own shades and matching the colours on the vinyl and the type of the baby. Here your imagination knows no limits! The colours are very rich and productive for many reborn babies! In the same colour matching system, we offer protective coatings in matte and gloss, and a special thinner.
We will advise beginners in selecting the individual colors.
Alternative to the So Real! © PVC Colours we offer the same frequency used colour systems of Genesis and Jo Sonja. A wide range of different colours and additives we keep in the shop ready for you.
Useful tips:
Application: Here you have several options:
a) Simple stain: For more Peaches and Cream colouring
You can use the So Real! © PVC Colours in the same way as you would with the Genesis paint, thin it down with plenty of water.
First select a shade off the colour for your baby from the outside vinyl colour. You have the opportunity to achieve according to taste individual colour schemes. You should take into account the shade of hair and eyes you will be using.
If you have decided on a colour, the colour initially diluted 1:3 with water or So Real! © PVC Colour Thinner. We recommend that you use either water or the thinner, mixing the two can confuse the process.
Then take a baby wet wipe (no oil cloth!), Wrap this around your index finger and take up a little colour. The cloth should be now too wet, dab your finger onto an old towel before you go on the vinyl.
Then rub the paint evenly and thinly into the vinyl parts. In this case, you should exercise just a little pressure, so that the pigments responsible not only on the surface, otherwise they can be very easy to remove. As with all staining methods also follow the principle: Less is more! I would rather go several times over the bodies to be coloured than once too strong! When the paint is drawn into the vinyl, it is smudge and water resistant.
You can just as you emphasize the following points of the baby from the outside (blush):
- Cheeks
- The nose
- Chin
- The end
- Back of the hand, elbow and the outside of the arms
- Foot, feet, knees, and the outside of the legs
As long as the paint is still wet, you can correct its colour intensity. You would get a more intense result if the baby wipes washed before use in clear water. However, a bit of flair and practice is required!
The same colour you can use to paint the lips of the baby. Contextual changes to the colour that you have previously used for colouring the cheeks so that the colours in the face look uniform. The colour of the lips should be more diluted, so that it shines only slightly transparent.
! B) Multi-layer colour in the So Real © Skin Technology:
This staining method is defined as the application of the dye solution in several thin individual layers. Basis for an optimal three-dimensional colouring success is also the mixture of So Real! © PVC Colours in the ratio 1:3 with water or So Real! © PVC Colour Thinner.
1. Primer: In order to achieve the most uniform coat of the skin, it begins with a skin-tone (eg, Unbleached Titanium, Skin Tone Light Skin Tone Base, Fawn), and a bit of a brown tone (eg, Brown Earth, Burnt Sienna, Burnt Umber). Then this mixture is diluted with water or So Real! © PVC Color Thinner.
Will then use a bristle brush (also available in our range) in order to incorporate colour solution. Take your *Bulb Brush* and pick up some paint, now you need to pounce the bristles onto the vinyl, quite hard, like a stippling motion until the vinyl is completely dry.
Because of the continuous movement of the Bulb-bristle brush you will have made a visible pore structure. You can repete this stage one or two times, however, make sure that your baby is not "chalky". With a very red or pink base to the vinyl you can use a little bit of Sap Green to neutralize the vinyl colour.
2. Blushing: After you've primed your baby consistently, you should wait a while until the colours are dried off completely. Then you can start with the Blushing.
Here is where you can be very creative, mix up a darker skin tone using (Brown Earth, Burnt Sienna, Burnt Umber) with water or So Real! © New PVC Colour Thinner on. Pick up some of your paint on your *Bulb Brush and highlight the high area’s listed below. Here, however, do not cover the whole vinyl, but only individual points in order to achieve a vibrant lustrous skin effect. Then repeated the same dyeing process again with a new mixed red clay of your choice (eg Plum Pink, Rose Pink, Burgundy, Indian Red Oxide). Finally you can intensify the colour with your already mixed shade of red again the following locations of your baby:
- Cheeks
- The nose
- Chin
- The end
- Fingers, back, hands and elbows inside
- Toes, feet, soles of the feet and knees
Individual creases can also be highlighted with a fine brush to stress - pays attention to the fact that the total colouring is not too strong. With a Large 1” Mop Brush blend the creases so they do not look sore.
3. Veins and capillaries: You can now have a few fine veins and capillaries are distinguished. It uses a violet tone (eg, Red Violet, Transparent Yellow, Pthalo Blue and Dioxadine Purple) and dabbed it with a very thin brush in a somewhat more concentrated form on the vinyl. Here's a little exercise is necessary, because the veins were later not to appear thick and barely visible.
Finally, you can as desired with the lips and Nails So Real! © PVC Colour Sealer or our special So Real! © Liquid Vinyl Sealer in satin or gloss permanent seal.
Visit us on eBay
